What are the tools for stainless steel flange derusting

　　The stainless steel flange is a part that connects the pipe and the pipe, which is connected to the pipe end. There are holes on the flange, and bolts make the two flanges tightly connected. Stainless steel flange in use after a period of time, there will be some dirt, how to rust? What rust removal tools?

　　Stainless steel flange rust removal tools are as follows:

　　1. Rust hammer

　　The blade is about 20 mm wide, mainly used to knock out rust, loose oxide scale and old coating on the surface. There is also a sharp hammer with a tip, which is used to remove the rust in the deep of the depression.

　　2. Blade

　　The blade is about 50 ~ 100cm long, made of wood handle or hollow steel pipe, and the blade is 40mm ~ 20cm wide, made of carbon steel or tungsten steel. It is mainly used to remove rust, oxide scale, old coating and dirt on the surface.

　　3. Scraper

　　One end is flat, the other end is curved, and both ends have blades. It is made of carbon steel, about 20cm long. The function of the flat end is the same as that of the scraper, and the elbow is used to remove the rust and dirt on the back of the angle iron; there is also a sharp blade, one end of the elbow is pointed, which is used to remove the rust and putty and other dirt in the gap.

　　4. File

　　There are plane, triangle and other shapes, mainly used to remove welding slag and other prominent hard objects.

　　5. Wire brush

　　It is divided into long handle and short handle. The end face of the brush is strung with fine steel wire, which is used to remove the rust and residue left by other tools; the other kind of steel wire bundle with steel wire at both ends is used for the gap and hole parts.

　　In the stainless steel flange derusting, all need to have the above tools, which can be of great help to derusting.