Pipe cap parameters
2022-02-08 08:56:40 Comment:0 Hits：
Pipe cap, also known as head, plug, cap, pipe cover and bulkhead, is a pipe fitting welded on the pipe end or installed on the external thread of the pipe end to cover and block the pipe. It is used to close the pipeline, and its function is the same as that of pipe plug.
Nominal Diameter |
Outside Diameter at Bevel |
|
||||
| Series A | Series B | E | T | E1 | ||
| DN | NPS | |||||
| 15 | 1/2 | 21.3 | 18 | 25 | 4.57 | 25 |
| 20 | 3/4 | 26.9 | 25 | 25 | 3.81 | 25 |
| 25 | 1 | 33.7 | 32 | 38 | 4.57 | 38 |
| 32 | 1.1/4 | 42.4 | 38 | 38 | 4.83 | 38 |
| 40 | 1.1/2 | 48.3 | 45 | 38 | 5.08 | 38 |
| 50 | 2 | 60.3 | 57 | 38 | 5.59 | 44 |
| 65 | 2.1/2 | 76.1(73) | 76 | 38 | 7.11 | 51 |
| 80 | 3 | 88.9 | 89 | 51 | 7.62 | 64 |
| 90 | 3.1/2 | 101.6 | - | 64 | 8.13 | 76 |
| 100 | 4 | 114.3 | 108 | 64 | 8.64 | 76 |
| 125 | 5 | 139.7 | 133 | 76 | 9.65 | 89 |
| 150 | 6 | 168.3 | 159 | 89 | 10.92 | 102 |
| 200 | 8 | 219.1 | 219 | 102 | 12.70 | 127 |
| 250 | 10 | 273.0 | 273 | 127 | 12.70 | 152 |
| 300 | 12 | 323.9 | 325 | 152 | 12.70 | 178 |
| 350 | 14 | 355.6 | 377 | 165 | 12.70 | 191 |
| 400 | 16 | 406.4 | 426 | 178 | 12.70 | 203 |
| 450 | 18 | 457.2 | 478 | 203 | 12.70 | 229 |
| 500 | 20 | 508.0 | 529 | 229 | 12.70 | 254 |
| 550 | 22 | 559 | - |
254 |
12.70 | 254 |
| 600 | 24 | 610 | 630 |
267 |
12.70 | 305 |
| 650 | 26 | 660 | - | 267 | - | - |
| 700 | 28 | 711 | 720 | 267 | - | - |
| 750 | 30 | 762 | - | 267 | - | - |
| 800 | 32 | 813 | 820 | 267 | - | - |
| 850 | 34 | 864 | - | 267 | - | - |
| 900 | 36 | 914 | 920 | 267 | - | - |
| 950 | 38 | 965 | - | 305 | - | - |
| 1000 | 40 | 1016 | 1020 | 305 | - | - |
| 1050 | 42 | 1067 | - | 305 | - | - |
| 1100 | 44 | 1118 | 1120 | 343 | - | - |
| 1150 | 46 | 1168 | - | 343 | - | - |
| 1200 | 48 | 1220 | 1220 | 343 | - | - |
| When T is less the dimension in parentheses, the height E is available. Otherwise E1 is available. | ||||||
previous page：Manufacturing technology of carbon steel pipe fitting reducer
next pageCauses of cracks during bend process
